Ads 468x60px

Labels

Tuesday, January 24, 2012

FREE WireName Tutorials





Please check out the this page for more tutorials as this list will be updated from time to time. 

        Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida



HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius



Contact Me

How to Reach Me

Homepage:
http://www.corneliushenry.com
E-mail:
malaysianhomebusiness@gmail.com

Instant Messaging:


 Yahoo: consxavier
 skype: cornelius_henry



HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius



Wire Jewelry Step by Step : Mother

Wire Jewelry Step by Step : Mother

Before I start the lessons, you need to know a few things.

1. The wire can not be too soft. If you start with the soft wire, your names are not
    going to be easy to make them latter on. 28 g. round is good.

2. If you use sq. wire you need to pay attention every time you bend it because it will
    twist, for sure. {In this case you need square nose pliers to untwist it}

3. Always pinch the wire from the back when bending.
    Do not unbend (Go back to do it better} because it will brake

4. Make sure your work is flat and even while you are working the piece otherwise is
    going to be difficult to do it later.

5. Get 15 inches of wire so you practice more than once.

6. Be patient, maybe the first few times is not what you expect but practice will get
    you there. {My first one looked like a license plate in zig zag big and uneven}

Now here we go on the wire name lessons:


        Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida

TUTORIAL 3: "Mother" Pendant 

1. Start about 1½ inches from the end of the wire, turning the long piece of the wire to the
    front of the pliers; make a loop {one complete circle}.

2. Working on the long piece of the wire; pinch a little less than ½ of an inch and bend to
    the back.

3. Press it down at the top, roll the top to the right just a little bit. You are rolling two wires
    together (picture #1 in tutorial #1



4. Grasp the wire at the top and pull it to the right, a little bit.

5. Grasp the wire at the middle, and bend it back and up, pinch a little; pull it to the right.

6. Grasp the wire at the top even with the first part of the “M” and bring it down; pinch at
    the top ( you made the “M”)

7. Grasp the wire at the bottom even with bottom of the “M” and bring it up

8. Grasp it about half way from the “M” , bring it down to the right to make a hump 
    (see picture #1)



9. Grasp the wire from the back at the bottom and bring it up through the front 
    (see picture #2)


10. Grasp the wire at he back; on the left side of the circle and bend it to the right
     ( see picture #3) you are making the “o”



11. Leave the pliers there and bring wire to the left and down to make the “o”
      (see picture #4)


12. Grasp the two wires at the bottom and through the “o” bring it up (see picture #5)


13. Grasp it at the top even with the “M” and bend it to the back.; pinch it at the top.

14. Grasp it from the back at the tip; bend it to the right.

15. Grasp the wire that you just bend, an bring it around the pliers and the wire; to the
      front of the “t” you are making the cross of the “t” (see pictures in tutorial #2)



16. Grasp it at the back and bend it down and hide it behind (carefully pinch the cross of
      the “t'” ) making sure is even and you do not see the back wires.

17. Grasp it at the bottom of the “t' and bend it up.

18. Grasp the wire even with the top with the “t” bend it down and to the front looks like
      an “L”.

19. Grasp it at he bottom and bend it up, toward you and pinch it a little.

20. Grasp it in the back about the level of the “o” and bend it to the right, to make a hump
      you made the “h”.

21. Grasp the wire at the bottom and bring it up; grasp it even with the “o” and bring it
      down through the front to make the “e”.


22. Grasp it at the bottom and bring up, (grasp it even with the “e”) and bend it back and
      down, pinch it at the very top and bring it up.

      Grasp it close to the bend top and bring down (see picture #6) you have the “r” Grasp
      it at the bottom through the back and bring it up



Congratulations: You finish the pendant: MOTHER.

Now; take the end; grasp it a little higher than the tip of the “M” (
look at the picture for reference) and bend it up, fold it back and around the
pliers twice, to form a double loop; then around the wire twice to finish it;
cut the excess in the back.

This is for the chain; do the same with the piece of wire that you left in the very beginning.
Finish filing the ends and carefully crimp the ends.

Polish it a little and Enjoy it!!!



Cut the extra wire in the first loop, make it look like a heart. Fold the wire to make a loop
to hang do it twice. Put it on the name.

        Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida

HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius



Monday, January 23, 2012

Wire Jewelry Step by Step : Beth

Wire Jewelry Step by Step : Beth

Before I start the lessons, you need to know a few things.

1. The wire can not be too soft. If you start with the soft wire, your names are not
    going to be easy to make them latter on. 28 g. round is good.

2. If you use sq. wire you need to pay attention every time you bend it because it will
    twist, for sure. {In this case you need square nose pliers to untwist it}

3. Always pinch the wire from the back when bending.
    Do not unbend (Go back to do it better} because it will brake

4. Make sure your work is flat and even while you are working the piece otherwise is
    going to be difficult to do it later.

5. Get 15 inches of wire so you practice more than once.

6. Be patient, maybe the first few times is not what you expect but practice will get
    you there. {My first one looked like a license plate in zig zag big and uneven}

Now here we go on the wire name lessons:


        Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida




TUTORIAL 2 : Beth Pendant (Part 1)
1. Start about 1½ inches from the end of the wire, turning the long piece of the 
    wire to the front of the pliers; make a loop {one complete circle}.

2. Working on the long piece of the wire; pinch a little less than ½ of an inch
    and bend to the back.

3. Press it down at the top, roll the top to the right just a little bit. You are rolling
    two wires together (picture #1 in tutorial #1)

4. Working on the back of the wire; grasp it at the top and bend it up and to the
    left and to the back of the “B” you should have a “P” (picture #1).


5. Grasp the wire in the cross of the “B” inside loop ( picture #2) and bend it to
   the front.

6. Grasp the two wires from the back and; bring down the wire forming a half
    circle, go around the back to form the 'B' (picture #3)


7. Grasp the wire at the bottom and bring it up to make the “e”.

8. Grasp it about half way from the “B” , bring it down to the right to form a loop
    (you made an “e”).

9. Grasp the wire from the back at the bottom and bring it up (picture #4)



10. Grasp the wire even with the “B” and bend it to the back.; pinch it at the top
      (picture #5)

11. Grasp it from the back at the tip; bend it to the right (picture #6)


12. Grasp the wire that you just bend, an bring it around the pliers and the wire;
      to the front of the “t” you are making the cross of the “t”.

13. Grasp it on the other side of the “t” and bring it to the back (make sure is
      even with the front).

14. Grasp it at the back and bend it down and hide it behind (carefully pinch the
      cross of the “t'” ) making sure is even and you do not see the back wires. (picture #7)


15. Grasp it at the bottom of the “t' and bend it up.

16. Grasp the wire even with the top with the “t” bend it down and to the front
      looks like an “L”.

17. Grasp it at he bottom and bend it up, toward you and pinch it a little.

18. Grasp it in the back about the level of the “e” and bend it to the right, to
      make a hump you made the “h” (picture #8)

 

19. Congratulations you finish the name. Now, take the end; grasp it a little
      higher than the tip of the “B” (look at the picture for reference) and bend it up,
      fold it back and around the pliers twice, to form a double loop; then around the 
      wire twice to finish it; cut the excess in the back. 

This is for the chain; do the same with the piece of wire that you left in the very beginning. 

Finish filing the ends and carefully crimp the ends. Polish it a little and Enjoy it!!!

Part 2 “Beth” Pendant with dangling heart

20. TO DO THE HEART, take about 2 ½ ” of wire and bend it in half, pinch it and  roll it,
      open the two ends. Grasp it about ½ inch and bend it down, (make one loop) grasp the 
      other side and do the same. Grasp it at the top of the second loop and bend it back; pinch it . 
    
     Cut the extra wire in the first loop, make it look like a heart. 

     Fold the wire to make a loop to hang do it twice. Put it on the name.

You can go to other tutorials by clicking the link below. Thank you.



        Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida




HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

All the best,
Cornelius






Wire Jewelry Step by Step: Amy (Pendant)

Wire Jewelry Step by Step : Amy 

Maggie has worked hard on this tutorial for all the people looking for a kickstart in learning wirename crafts. So Thanks to Maggie=) 

During my early days, He tutorials helped me a lot! 

Before I start the lessons, you need to know a few things.

1. The wire can not be too soft. If you start with the soft wire, your names are not
going to be easy to make them latter on. 28 g. round is good.

2. If you use sq. wire you need to pay attention every time you bend it because it will
twist, for sure. {In this case you need square nose pliers to untwist it}

3. Always pinch the wire from the back when bending.
Do not unbend (Go back to do it better} because it will brake

4. Make sure your work is flat and even while you are working the piece otherwise is
going to be difficult to do it later.

5. Get 15 inches of wire so you practice more than once.

6. Be patient, maybe the first few times is not what you expect but practice will get
you there. {My first one looked like a license plate in zig zag big and uneven}



Now here we go on the wire name lessons:

         Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida

Tools You Need
  1. Wire,
  2. cutters,
  3. round nose pliers
  4. {maybe square nose pliers.}


Happy twisting!!!!!!

Now here we go on the wire name lessons:


TUTORIAL 1 : “Amy” Pendant



1. Start about 1½ inches from the end of the wire, turning the long piece of the wire to the
front of the pliers; make a loop {one complete circle}.

2. Working on the long piece of the wire; pinch a little less than ½ of an inch and bend to
the back.

3. Press it down at the top, roll the top to the right just a little bit. You are rolling two wires
together (picture #1)


4. Working on the back of the wire; grasp it at the top and bend it up. (picture #2)


5. Grasp it at the top of the “A” and bring all the way down. (picture #3)


6. Grasp it at the bottom of the “A” (second leg) making sure the wire is on the front; and
bring it to the left all the way around the pliers (you have made another loop and the front
part of the cross of the “A”)

7. Grasp it at the cross of the “A” this time in the front and bring the wire around and to
the back of the “A”. Hide this wire behind the one in the front.( It should looks like the
picture # 4)



8. Press it down a little bit. To clamp it.

9. Grasp the wire next to the tip of the loop (picture #5) bring it down to make a hump. 


10. Grasp at the bottom (should be even with second loop) bring it back and up, pressing a
little at the foot of the first hump.

11. Grasp in the back the top of the leg you just made and bring it over to the right.
(second hump)

12. Grasp the wire and bend it to the back and up again; grasp it in the back and make
another hump. You should have a complete “m”. 


13. Grasp it on the bottom of the “m” bend wire to the right and up; grasp the wire at the
top; make it even with the “m” and bring down. Press it a little. You got the first leg of the
“y”

14. Grasp it at the bottom bring to the right and up.

15. Grasp it at the top (a little higher than the first part of the “y:”) bring it to the back and
down; press it at the top and roll the two wires together a little bit. (you should have the
“y” )

16. From the back grasp the tail (wire should be in front of the pliers) bring to the left and
up to the right.

17.Now, take the end; grasp it a little higher than the tip of the “A (look at the picture for reference) and bend it up, fold it back and around the pliers twice, to form a double loop; then around the wire twice to finish it; cut the excess in the back. This is for the chain; do the same with the piece of wire that you left in
the very beginning. Finish filing the ends and carefully crimp the ends. Polish it a little and
Enjoy it!!!

 Congratulations you finish the name. 

You can go to other tutorials by clicking the link below. Thank you.


        Lesson #                    Description
       One                     Amy
       Two                    Beth
       Three                  Mother
       Four                   Cindy
       Five                    Diane
        Six                      Evelyn
     Seven                 Ruby
     Eight                  Frida
HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius



Teen Gift Idea To Bring Delight To The Hard To Please



With their seemingly endless adolescence problems, the teen age group is probably the hardest to please with a gift idea. This makes picking out a gift idea for a teen a very challenging and arduous task indeed. The sort of task that many parents and relatives dread with a capital "D".


Fortunately, once again, a wise and shrewd parent or relative seeking a teen gift idea can settle for the tried and tested age old idea that has never been known to disappoint. We are of course talking about jewelry here.
But even within a jewelry idea of a teen gift, there is a wide range of different ideas to choose from. This is because there are many different jewelry items to choose from. The teen gift idea that you end up will also be greatly impacted by the gender of the teen that the gift is targeted at. Teen girls are probably the category that has the widest possible choices of items and ideas available in jewelry. But then they will tend to be more difficult to satisfy and please with a gift than their male counterparts.
Some of the possible wire jewelry items that you can seriously consider for your teen gift idea to a girl include wire name pins and brooches, Cabochon pendants, neck wire and earrings to name but a few.
Another useful factor to consider when agonizing over the right teen gift idea in jewelry is the character and personality of the person being gifted. This can assist you greatly when it comes to settling on certain specifics and finer details of the teen gift idea.
Still what you will have going for you when looking for a teen gift idea is the fact that the finishing touch you put will add tremendous value in the recipients' eyes. And that is the personalization of the jewelry by curving out their name or initials on the item. There are many beautiful ways in which this can be easily accomplished amongst most of the leading online dealers in wire name jewelry.


Article Source: http://EzineArticles.com/198206


HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius



About Me

Make More Money online and offline with this Unique craft of Making Personalized
Name Jewelry

Hi there,

My name is Cornelius Henry. I am from Kota Kinabalu, Sabah, Malaysia and I've created this blog to share my passion and interest in wirename bending. I know that you found this blog after searching online. 

My goal for this blog is to help you learn more about this wirename craft that I love and to point you to resources either FREE or PAID. I will be paid whenever you buy any products from the links I shared in this blog and I thank you for it. 

I am also a freelance internet business consultant and you can contact me by going to my website Internet Business Enterprise


HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius



 

Testimonials


I bought the 'How to Make Wire Names" book and I am GLAD I found it. I am a 66 yr old disabled man on dialysis and now I have a way to make a living!

Doing wire names at festivals and farmers markets and my worst day I made $100. Usually I make between $200 & $300 a day. Not bad for "working" 10 hours on a weekend.

I love what I am doing and the people I meet making wire name pins and pendants
Thanks for showing me this opportunity...

By Peter Lansing



Get it Here



What Will You Get?


Now with 162 pages jam packed with Instructions and Photographs. This Skill could make all the difference to how you make money in the future..